Product Description
Unilift AP50.50.08.A1.V
Submersible drainage pump type
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection.
The pump is fitted with suction strainer and level switch for automatic start and stop.
The impeller is a VORTEX impeller for 50 mm free passage suitable for pumping groundwater, surface water, rain water and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.
The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
Liquid:
Pumped liquid: Any Newtonian liquid
Liquid temperature range: 0 .. 55 °C
Density at selected liquid temperature: 998.2 kg/m³
Technical:
Type of impeller: VORTEX
Maximum particle size: 50 mm
Materials:
Pump housing: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Pump outlet: Rp 2
Maximum installation depth: 7 m
Electrical data:
Type of motor: PSC
Power input - P1: 1.3 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 230 V
Rated current: 5.9 A
Cos phi - power factor: 0.99
Rated speed: 2790 rpm
Capacitor size - run: 16 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 10 m
Type of cable plug: SCHUKO
Others:
Net weight: 16 kg
Gross weight: 16.5 kg
Danish VVS No.: 391321312
Swedish RSK No.: 5885793
Norwegian NRF no.: 9045685
Downloads :
Data booklet of Unilift CC KP AP and KPC
installation & services Unilift KP 150KP 250KP 350
installation & servies Unilift AP_APB_KP (Safety instructions and other important information)
