Product Description
Unilift AP50B.50.11.A1.V
Submersible effluent pump
Vertical single-stage stainless steel submersible pump with integrated submersible 1-phase motor.
The pump is fitted with ring stand and carrying handle and is supplied with a 5 m mains cable and a level switch for automatic start and stop.
The impeller is a VORTEX impeller for 50 mm free passage suitable for pumping surface water, groundwater, wastewater and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The motor is insulation class F with thermal overload protection and has long-life deep-groove greased-for-life ball bearings.
The pump has R 2" discharge port and is ready for installation either free-standing or on an auto-coupling system.
Liquid:
Pumped liquid: Any Newtonian liquid
Maximum liquid temperature: 40 °C
Density at selected liquid temperature: 998.2 kg/m³
Technical:
Type of impeller: VORTEX
Maximum particle size: 50 mm
Materials:
Pump housing: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Pump outlet: R 2"
Maximum installation depth: 2 m
Auto-coupling: Y
Electrical data:
Type of motor: PSC
Power input - P1: 1.75 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 230 V
Rated current: 8 A
Cos phi - power factor: 0.95
Rated speed: 2760 rpm
Capacitor size - run: 20 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 5 m
Type of cable plug: SCHUKO
Others:
Net weight: 10.5 kg
Gross weight: 11.5 kg
Danish VVS No.: 391272332
Swedish RSK No.: 5885938
Norwegian NRF no.: 9045692
Downloads :
Data booklet of Unilift CC KP AP and KPC
installation & services Unilift KP 150KP 250KP 350
installation & servies Unilift AP_APB_KP (Safety instructions and other important information)
