Product Description
SP 2A-28
Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval. The pump is fitted with a 1.5 kW MS402 motor with sand shield, lip seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical stability and high efficiency. Suitable for temperatures up to 40 °C. The motor is not fitted with a temperature sensor. If temperature monitoring is desired, a Pt1000 sensor can be fitted. The motor is for direct-on-line starting (DOL).
Liquid:
Pumped liquid: Water
Maximum liquid temperature: 40 °C
Max liquid t at 0.15 m/sec: 40 °C
Selected liquid temperature: 20 °C
Density at selected liquid temperature: 998.2 kg/m³
Technical:
Pump speed on which pump data are based: 2900 rpm
Rated flow: 33.33 l/min
Rated head: 111 m
Shaft seal for motor: LIPSEAL
Approvals on nameplate: CE,EAC
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Specification for shaft end: SPLINE
Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Pump outlet: Rp1 1/4
Motor diameter: 4 inch
Electrical data:
Motor type: MS402
Type of motor: CSCR
Rated power - P2: 1.5 kW
Power (P2) required by pump: 1.5 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 240 V
Rated current: 9.8 A
Starting current: 450 %
Cos phi - power factor: 0.98
Rated speed: 2860 rpm
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): B
Built-in temp. transmitter: no
Motor No: 79243106
Others:
Minimum efficiency index, MEI ≥: 0.70
ErP status: EuP Standalone/Prod.
Net weight: 18.8 kg
Gross weight: 20.6 kg
Shipping volume: 21.7 m³
Downloads:
1. Brochures
OPTIMISED-FOR-UNDERGROUND-PERFORMANCE_(SP)(Product brochure)
SP-Installation-quick-guide(Product brochure)
SP-Pump-performance-measuring(Product brochure)
2. Installation & operating instructions
3. Data booklets
SP-A_SP-submersible pumps-motors_and_accessories(Data booklet)
4. Service
