Product Description
The Davey HM90-13T is a multistage pressure pump fitted with a Torrium2 controller for automatic water supply. It is suitable for household and domestic water supply, farming and agricultural water systems, irrigation and turf watering systems, and automatic general water transfer.
The pump features stainless steel hydraulic components, including high-efficiency impellers, casing and stages, for corrosion resistance and reliable operation. An air purging valve assists with priming, while the TEFC motor provides efficient and quiet operation. The Torrium2 controller provides constant flow control, loss of prime protection and over-temperature cut-out.
The HM90-13T uses a 1.4kW output motor operating on 230V single phase power. It delivers a nominal flow of 90 L/min at an operating pressure of 480kPa, with a maximum pump pressure of 680kPa. The system has a 1¼" female inlet and 1" male outlet.
Key Specifications:
- Model – Davey HM90-13T
- Product Type – Multistage Pressure Pump with Controller
- Controller – Torrium2
- Pump Design – Multistage Centrifugal
- Supply Voltage – 230V ±10%
- Supply Frequency – 50Hz
- Phase – Single
- Speed – 2900rpm
- Running Current – 7.2A
- Starting Current – 40A
- Input Power (P1) – 1.7kW
- Output Power (P2) – 1.4kW
- Motor Type – TEFC
- Enclosure Class – IP56
- Insulation Class – Class F
- Nominal Flow – 90 L/min
- Nominal Operating Pressure – 480kPa
- Maximum Pump Pressure – 680kPa
- Maximum Water Temperature – 65°C
- Pump Casing – 304 Stainless Steel
- Impellers – 304 Stainless Steel
- Pump Shaft – 316L Stainless Steel
- Inlet – 1¼" Female BSP
- Outlet – 1" Male BSP
- Net Weight – 23.6kg
- Warranty – 2 Years
- Applications – Household & Domestic Water Supply, Farming & Agricultural Water Systems, Irrigation, Turf Watering & Automatic General Water Transfer
Downloads:
HMT_WaterPressureSystems_Datasheet
Pumps_Torrium2Controller_Datasheet
Pumps_HM_WaterPressureSystem_Installation_and_Operating_Instructions
