Product Description
The Onga CBI4-30PC15 is an automatic multistage pressure pump system supplied with a PC15 electronic pressure controller. It is designed for domestic, agricultural and light industrial clean water supply, including pressure boosting, irrigation, potable water supply and general water distribution.
The pump features a three-stage design with 304 stainless steel hydraulic components for corrosion resistance and durability. Its stainless steel impellers, pump housing and shaft, silicon carbide/carbon mechanical seal and sturdy stainless steel mounting foot provide reliable construction for regular water supply applications.
The PC15 electronic pressure controller automatically starts the pump when system pressure falls to approximately 150kPa and stops it when water demand ceases. It also detects certain abnormal operating conditions, including loss of water supply, and stops the pump to help prevent damage. A manual reset button allows operation to resume once the problem has been corrected.
The CBI4-30PC15 operates on 240V single-phase power at 50Hz. It features a TEFC motor with IP54 enclosure protection and a supplied 1.8 metre power lead with Australian three-pin plug. The system includes a brass suction line check valve and features a 32mm (1 1/4") female BSP inlet and 25mm (1") female BSP outlet.
Key Specifications:
- Model – Onga CBI4-30PC15
- Product Type – Automatic Multistage Pressure Pump with Electronic Controller
- Pump Design – Horizontal Multistage Centrifugal
- Number of Stages – 3
- Pressure Control – PC15 Electronic Pressure Controller
- Controller Restart Pressure – 150kPa (23psi)
- Controller Operation – Automatic Start and Stop Based on Pressure and Water Flow
- Dry Run Protection – Electronic Failure Detection and Pump Shutdown
- Controller Reset – Manual Reset Button
- Motor Power – 0.75kW (Supplier Listed)
- Supply Voltage – 240V
- Supply Frequency – 50Hz
- Phase – Single Phase
- Motor Type – TEFC
- Motor Speed – 2800rpm
- Motor Enclosure – IP54
- Inlet – 32mm (1 1/4") Female BSP
- Outlet – 25mm (1") Female BSP
- Pump Construction – 304 Stainless Steel
- Impellers – 304 Stainless Steel
- Pump Shaft – 304 Stainless Steel
- Mechanical Seal – Silicon Carbide / Carbon
- Mounting Foot – Stainless Steel
- Suction Line Check Valve – Brass, Included
- Pumped Liquid – Clean Water Without Solid Particles
- Liquid Temperature Range – 4°C to 40°C
- Maximum Ambient Temperature – 40°C
- Power Lead – 1.8 Metres
- Power Plug – Australian Three-Pin
- Applications – Domestic Water Supply, Agricultural Water Supply, Light Industrial Water Supply, Pressure Boosting, Potable Water Supply, Irrigation & Heating and Cooling Systems
Documents:
SXParts-PressureUnitsTransferPumps
