Product Description
The Onga CBI4-60PC22 is an automatic multistage pressure pump system supplied with a PC22 electronic pressure controller. It is designed for domestic, agricultural and light industrial water supply applications, including pressure boosting, potable water supply and general clean water distribution.
The pump features six stages with 304 stainless steel impellers, pump housing, suction chamber and intermediate chambers for corrosion resistance and durability. Its stainless steel shaft, silicon carbide/carbon mechanical seal and sturdy stainless steel mounting foot provide reliable construction for regular water supply applications.
The PC22 electronic pressure controller automatically starts the pump when system pressure falls to approximately 220kPa and stops it when water demand ceases. It also provides protection against loss of water supply by detecting abnormal operating conditions and stopping the pump. A reset button allows the controller to be restarted once the problem has been corrected.
The CBI4-60PC22 uses a 1450W motor operating on 240V single-phase power at 50Hz. It features a TEFC motor with IP54 enclosure protection, built-in thermal overload protection and a supplied 1.8 metre power lead with Australian three-pin plug. The system includes a brass suction line check valve and features a 32mm (1 1/4") female BSP inlet and 25mm (1") female BSP outlet.
Key Specifications:
Model – Onga CBI4-60PC22
Product Type – Automatic Multistage Pressure Pump with Electronic Controller
Pump Design – Horizontal Multistage Centrifugal
Number of Stages – 6
Pressure Control – PC22 Electronic Pressure Controller
Controller Restart Pressure – 220kPa (32psi)
Controller Operation – Automatic Start and Stop Based on Pressure and Water Flow
Dry Run Protection – Electronic Failure Detection and Pump Shutdown
Controller Reset – Manual Reset Button
Motor Power – 1450W
Supply Voltage – 240V
Supply Frequency – 50Hz
Phase – Single Phase
Full Load Current – 6.2A
Motor Type – TEFC
Motor Speed – 2800rpm
Motor Protection – Built-In Thermal Overload
Motor Enclosure – IP54
Flow Performance – 102 L/min at 150kPa
Flow Performance – 92 L/min at 200kPa
Flow Performance – 84 L/min at 250kPa
Flow Performance – 72 L/min at 300kPa
Flow Performance – 59 L/min at 350kPa
Flow Performance – 46 L/min at 400kPa
Flow Performance – 32 L/min at 450kPa
Inlet – 32mm (1 1/4") Female BSP
Outlet – 25mm (1") Female BSP
Pump Construction – 304 Stainless Steel
Impellers – 304 Stainless Steel
Pump Shaft – 304 Stainless Steel
Mechanical Seal – Silicon Carbide / Carbon
Mounting Foot – Stainless Steel
Suction Line Check Valve – Brass, Included
Pumped Liquid – Clean Water Without Solid Particles
Liquid Temperature Range – 4°C to 40°C
Maximum Ambient Temperature – 40°C
Power Lead – 1.8 Metres
Power Plug – Australian Three-Pin
Length – 469mm
Width – 204mm
Height – 320mm
System Weight – 16.6kg
Applications – Domestic Water Supply, Agricultural Water Supply, Light Industrial Water Supply, Pressure Boosting, Potable Water Supply, Heating & Cooling Systems
Documents:
SXParts-PressureUnitsTransferPumps
