Product Description
The Davey CY70-110/A is a single stage stainless steel centrifugal transfer pump designed for clean, non-volatile liquids without fibres or solids. Part of the Davey CY Series, it is particularly suited to dairy washdown applications, along with small-scale irrigation, water transfer, washing systems and pressure boosting.
The pump features a closed vane 304 stainless steel impeller, 304 stainless steel casing and diffuser, and a 316 stainless steel pump shaft for corrosion resistance and durability. Its stainless steel hydraulic construction allows continuous water temperatures up to 80°C, making it suitable for demanding washdown and hot water transfer applications.
The CY70-110/A uses a two-pole TEFC motor with IP55 enclosure protection, Class F insulation and built-in automatically resetting thermal overload protection. The motor and pump are designed for frequent starts and use a permanently split capacitor design. It is supplied with a 1.8 metre power lead with bare wire termination.
The pump operates on 220–240V single-phase power at 50Hz, with 1.10kW output power and 1.40kW input power. It delivers flows up to 120 L/min and a maximum total head of 36 metres, with a maximum suction lift of 7 metres. The pump features a 32mm (1 1/4") female BSP inlet and 25mm (1") female BSP outlet.
Key Specifications:
- Model – Davey CY70-110/A
- Product Type – Single Stage Stainless Steel Centrifugal Transfer Pump
- Pump Design – Single Stage, Closed Vane Impeller
- Number of Impellers – 1
- Maximum Flow – 120 L/min
- Maximum Total Head – 36 Metres
- Maximum Suction Lift – 7 Metres
- Supply Voltage – 220–240V
- Supply Frequency – 50Hz
- Phase – Single Phase
- Motor Speed – 2900rpm
- Input Power (P1) – 1.40kW
- Output Power (P2) – 1.10kW
- Rated Current – 7.3A
- Motor Type – TEFC, 2 Pole
- Motor Enclosure – IP55
- Insulation Class – Class F
- Motor Starting – Permanently Split Capacitor
- Motor Protection – Automatic Reset Thermal Overload
- Inlet – 32mm (1 1/4") Female BSP
- Outlet – 25mm (1") Female BSP
- Maximum Pump Casing Pressure – 800kPa
- Water Temperature Range – -15°C to 80°C
- Maximum Continuous Water Temperature – 80°C
- Maximum Ambient Temperature – 55°C
- Pump Casing – 304 Stainless Steel
- Impeller – 304 Stainless Steel
- Diffuser – 304 Stainless Steel
- Pump Shaft – 316 Stainless Steel
- Impeller Lock Nut – 304 Stainless Steel
- Mechanical Seal – Carbon / Ceramic
- Seal Spring – 304 Stainless Steel
- Seal Bellows – Viton
- O-Rings – Viton
- Neck Ring – Teflon
- Motor Shell – Aluminium
- Motor Finish – Polyester
- Power Lead – 1.8 Metres
- Power Connection – Bare Wire Termination
- Length – 410mm
- Height – 260mm
- Net Weight – 14.5kg
- Warranty – 2 Years
- Applications – Dairy Washdown, Small-Scale Irrigation, Water Transfer, Washing Systems & Pressure Boosting
Downloads:
