Product Description
The Davey Dynaflo 62201SS is a single stage centrifugal water transfer pump designed for demanding water transfer applications, including seawater, brackish water and light brines. It is suitable for water supply, tank filling, sprinkler systems, garden reticulation, dairy washdown, factory floor cleaning and general water transfer in agricultural, commercial and industrial applications.
The pump features a cast 316 stainless steel casing and 316 stainless steel shaft for corrosion resistance when handling aggressive water. Its glass-filled polycarbonate impeller and silicon carbide mechanical seal provide durability, while the O-ring sealed hand-tightened priming plug allows easier priming and maintenance.
The Dynaflo 62201SS uses a Davey-manufactured two-pole TEFC motor with IP56 enclosure protection and Class F insulation. The motor includes automatic-reset thermal overload protection and double-contact sealed bearings. The pump and motor are designed for frequent starts, with corrosion-resistant mounting feet for long service life.
The pump operates on 220–240V or 440–480V single-phase power at 50Hz, with 2.2kW output power and 3.2kW input power. It delivers flows up to 350 L/min and a maximum total head of 38 metres, with a maximum suction head of 7 metres. The pump features a 50mm (2") female BSP inlet and 40mm (1 1/2") female BSP outlet.
Key Specifications:
- Model – Davey Dynaflo 62201SS
- Product Type – Single Stage Stainless Steel Centrifugal Water Transfer Pump
- Pump Design – Single Stage Centrifugal
- Maximum Flow – 350 L/min
- Maximum Total Head – 38 Metres
- Maximum Suction Head – 7 Metres
- Supply Voltage – 220–240V / 440–480V
- Supply Frequency – 50Hz
- Phase – Single Phase
- Input Power (P1) – 3.2kW
- Output Power (P2) – 2.2kW
- Full Load Current – 14A at 220–240V / 7A at 440–480V
- Locked Rotor Current – 54A at 220–240V / 27A at 440–480V
- Motor Type – TEFC, 2 Pole
- Motor Enclosure – IP56
- Insulation Class – Class F
- Motor Starting – PSC
- Motor Protection – Automatic Reset Thermal Overload
- Inlet – 50mm (2") Female BSP
- Outlet – 40mm (1 1/2") Female BSP
- Maximum Casing Pressure – 105m Head
- Water Temperature Range – 1°C to 50°C
- Pump Casing – Cast 316 Stainless Steel
- Impeller – Glass Filled Polycarbonate
- Pump Shaft – 316 Stainless Steel
- Impeller Locknut – ZF Brass
- Mechanical Seal – Silicon Carbide / Silicon Carbide
- Seal Elastomer – Nitrile Rubber
- Pump O-Rings – Nitrile Rubber
- Motor Shell – Aluminium
- Motor Finish – Baked Enamel
- Motor Mounting Feet – Xenoy Plastic
- Motor Through Bolts – 304 Stainless Steel with Brass Nuts
- Motor Fan – Polypropylene
- Power Lead – 2 Metres
- Power Plug – Australian 15A Three-Pin
- Length – 415mm
- Height – 280mm
- Net Weight – 32kg
- Warranty – 2 Years
- Applications – Seawater Transfer, Brackish Water, Light Brines, Water Supply, Tank Filling, Irrigation, Dairy Washdown, Factory Floor Cleaning & General Water Transfer
Downloads:
