Product Description
The Davey Dynaflo 62001 is a single stage centrifugal water transfer pump designed for water supply and general water transfer applications. It is suitable for tank filling, sprinkler systems, garden reticulation, dairy washdown, factory floor cleaning and irrigation in domestic, rural, agricultural and commercial installations.
The pump features a corrosion-resistant glass-filled Noryl casing with metal-reinforced inlet and outlet ports, a glass-filled polycarbonate impeller and a 304 stainless steel pump shaft. Its carbon/ceramic mechanical seal provides durability, while the O-ring sealed hand-tightened priming plugs allow easier priming and maintenance.
The Dynaflo 62001 uses a Davey-manufactured two-pole TEFC motor with IP56 enclosure protection and Class F insulation. The motor includes built-in automatic-reset thermal overload protection and double-contact sealed bearings. The pump and motor are designed for frequent starts, with corrosion-resistant mounting feet for reliable operation.
The pump operates on 220–250V single-phase power at 50Hz, with 1.0kW output power and 1.5kW input power. It delivers flows up to 270 L/min and a maximum total head of 25.5 metres, with a maximum suction head of 7 metres. The pump features a 40mm (1 1/2") female BSP inlet and 32mm (1 1/4") female BSP outlet.
Key Specifications:
- Model – Davey Dynaflo 62001
- Product Type – Single Stage Centrifugal Water Transfer Pump
- Pump Design – Single Stage Centrifugal
- Maximum Flow – 270 L/min
- Maximum Total Head – 25.5 Metres
- Maximum Suction Head – 7 Metres
- Supply Voltage – 220–250V
- Supply Frequency – 50Hz
- Phase – Single Phase
- Input Power (P1) – 1.5kW
- Output Power (P2) – 1.0kW
- Full Load Current – 6.8A
- Locked Rotor Current – 27A
- Motor Type – TEFC, 2 Pole
- Motor Enclosure – IP56
- Insulation Class – Class F
- Motor Starting – PSC
- Motor Protection – Automatic Reset Thermal Overload
- Inlet – 40mm (1 1/2") Female BSP
- Outlet – 32mm (1 1/4") Female BSP
- Maximum Casing Pressure – 50m Head
- Water Temperature Range – 1°C to 50°C
- Maximum Short-Term Water Temperature – 70°C for 10 Minutes
- Pump Casing – Glass Filled Noryl
- Impeller – Glass Filled Polycarbonate
- Pump Shaft – 304 Stainless Steel
- Mechanical Seal – Carbon / Ceramic
- Seal Elastomer – Nitrile Rubber
- Pump O-Rings – Nitrile Rubber
- Motor Shell – Aluminium
- Motor Finish – Baked Enamel
- Motor Mounting Feet – Xenoy Plastic
- Motor Through Bolts – 304 Stainless Steel with Brass Nuts
- Motor Fan – Polypropylene
- Power Lead – 2 Metres
- Power Plug – Australian 10A Three-Pin
- Length – 345mm
- Net Weight – 16.5kg
- Warranty – 2 Years
- Applications – Water Supply, Tank Filling, Sprinkler Systems, Garden Reticulation, Dairy Washdown, Factory Floor Cleaning & General Water Transfer
Downloads:
