Product Description
The Davey Boremaster 60061R is a single stage centrifugal water transfer pump specially designed for Western Australian conditions. It is suitable for shallow well water supply, garden reticulation, irrigation, tank filling and general water transfer applications, with a maximum suction head of 7 metres.
The pump features a corrosion-resistant glass-filled Noryl casing with metal-reinforced inlet and outlet ports, a glass-filled polycarbonate impeller and a 304 stainless steel pump shaft for durability. Its carbon/ceramic mechanical seal and O-ring sealed hand-tightened priming and drain plugs provide reliable operation and easier maintenance.
The Boremaster 60061R uses a Davey-manufactured two-pole TEFC motor with IP56 enclosure protection and Class F insulation. The motor includes built-in automatic-reset thermal overload protection and double-contact sealed bearings. The pump and motor are designed for frequent starts, with corrosion-resistant mounting feet for long service life. It is supplied with a 2 metre power lead and Australian 10A three-pin plug.
The pump operates on 220–250V single-phase power at 50Hz, with 1.6kW output power and 2.1kW input power. It delivers flows up to 315 L/min and a maximum total head of 31.6 metres. The pump features a 40mm (1 1/2") female BSP inlet and 32mm (1 1/4") female BSP outlet.
Key Specifications:
- Model – Davey Boremaster 60061R
- Product Type – Single Stage Centrifugal Water Transfer Pump
- Pump Design – Single Stage Centrifugal
- Maximum Flow – 315 L/min
- Maximum Total Head – 31.6 Metres
- Maximum Suction Head – 7 Metres
- Supply Voltage – 220–250V
- Supply Frequency – 50Hz
- Phase – Single Phase
- Input Power (P1) – 2.1kW
- Output Power (P2) – 1.6kW
- Full Load Current – 9.2A
- Locked Rotor Current – 40A
- Motor Type – TEFC, 2 Pole
- Motor Enclosure – IP56
- Insulation Class – Class F
- Motor Starting – PSC
- Motor Protection – Automatic Reset Thermal Overload
- Inlet – 40mm (1 1/2") Female BSP
- Outlet – 32mm (1 1/4") Female BSP
- Maximum Casing Pressure – 50m Head
- Water Temperature Range – 1°C to 50°C
- Maximum Short-Term Water Temperature – 70°C for 10 Minutes
- Pump Casing – Glass Filled Noryl
- Impeller – Glass Filled Polycarbonate
- Pump Shaft – 304 Stainless Steel
- Mechanical Seal – Carbon / Ceramic
- Seal Elastomer – Nitrile Rubber
- Pump O-Rings – Nitrile Rubber
- Motor Shell – Aluminium
- Motor Finish – Baked Enamel
- Motor Mounting Feet – Xenoy Plastic
- Motor Through Bolts – 304 Stainless Steel with Brass Nuts
- Motor Fan – Polypropylene
- Power Lead – 2 Metres
- Power Plug – Australian 10A Three-Pin
- Length – 395mm
- Net Weight – 19kg
- Applications – Shallow Well Water Supply, Garden Reticulation, Irrigation, Tank Filling & General Water Transfer
Downloads: