Product Description
The Davey XF221 is a single stage centrifugal water transfer pump designed for pumping clean, non-volatile liquids without fibres or solids. It is suitable for irrigation, aquaculture, water transfer, washing systems and hydroponics in domestic, rural and agricultural applications.
The pump features a closed vane glass-filled polycarbonate impeller, corrosion-resistant glass-filled Noryl pump casing and 304 stainless steel shaft for reliable operation. Its carbon/ceramic mechanical shaft seal provides durability, while the single stage design delivers high-flow performance for water transfer and circulation applications.
The XF221 uses a Davey-manufactured TEFC motor with IP55 enclosure protection, Class F insulation and built-in automatic-reset thermal overload protection. The motor and pump are designed for frequent starts and feature double contact C3-HTG sealed bearings. It is supplied with a 2 metre power lead and Australian 10A three-pin plug.
The pump operates on 220–240V single-phase power at 50Hz, with 0.70kW output power and 1.05kW input power. It delivers flows up to 225 L/min and a maximum total head of 20 metres, with a maximum suction head of 7.5 metres. The pump features a 25mm (1") female BSP inlet and 25mm (1") male BSP outlet.
Key Specifications:
- Model – Davey XF221
- Part Number – 71201
- Product Type – Single Stage Centrifugal Water Transfer Pump
- Pump Design – Single Stage, Closed Vane Impeller
- Number of Impellers – 1
- Maximum Flow – 225 L/min
- Maximum Total Head – 20 Metres
- Maximum Suction Head – 7.5 Metres
- Supply Voltage – 220–240V ±6%
- Supply Frequency – 50Hz
- Phase – Single Phase
- Motor Speed – 2850rpm
- Input Power (P1) – 1.05kW
- Output Power (P2) – 0.70kW
- Full Load Current – 4.5A
- Locked Rotor Current – 18.0A
- Motor Type – TEFC
- Motor Enclosure – IP55
- Insulation Class – Class F
- Motor Starting – PSC
- Motor Protection – Automatic Reset Thermal Overload
- Motor Bearings – Double Contact C3-HTG Sealed Bearings
- Inlet – 25mm (1") Female BSP
- Outlet – 25mm (1") Male BSP
- Pump Casing – Glass Filled Noryl
- Impeller – Glass Filled Polycarbonate
- Pump Shaft – 304 Stainless Steel
- Suction Cover – Glass Filled Noryl
- Diffuser – Glass Filled Noryl
- Mechanical Seal – Carbon / Ceramic
- Seal Spring – 304 Stainless Steel
- O-Rings – Nitrile Rubber
- Motor Shell – Marine Grade Aluminium
- Motor Finish – Baked Polyester
- Water Temperature Range – 1°C to 50°C
- Maximum Ambient Temperature – 50°C
- Power Lead – 2 Metres
- Power Plug – Australian 10A Three-Pin
- Length – 350mm
- Height – 215mm
- Net Weight – 8.3kg
- Applications – Irrigation, Aquaculture, Water Transfer, Washing Systems & Hydroponics
Downloads:
