Product Description
The Davey XF92 is a twin stage centrifugal water transfer pump designed for clean, non-volatile liquids without fibres or solids. It is suitable for irrigation, aquaculture, water transfer, washing systems and hydroponics in domestic, rural and agricultural applications.
The pump features two closed vane glass-filled polycarbonate impellers, a corrosion-resistant 304 stainless steel pump casing and stainless steel shaft for long service life. Its carbon/ceramic mechanical shaft seal provides reliable operation, while the twin stage design delivers higher pressure performance for applications requiring additional head.
The XF92 uses a Davey-manufactured TEFC motor with IP55 enclosure protection, Class F insulation and built-in automatic-reset thermal overload protection. The motor and pump are designed for frequent starts and feature double contact C3-HTG sealed bearings. It is supplied with a 2 metre power lead and Australian 10A three-pin plug.
The pump operates on 220–240V single-phase power at 50Hz, with 0.58kW output power and 0.84kW input power. It delivers flows up to 98 L/min and a maximum total head of 28 metres, with a maximum suction head of 7 metres. The pump features 25mm (1") female BSP inlet and outlet connections.
Key Specifications:
- Model – Davey XF92
- Part Number – 71401
- Product Type – Twin Stage Centrifugal Water Transfer Pump
- Pump Design – Twin Stage, Closed Vane Impellers
- Number of Impellers – 2
- Maximum Flow – 98 L/min
- Maximum Total Head – 28 Metres
- Maximum Suction Head – 7 Metres
- Supply Voltage – 220–240V ±6%
- Supply Frequency – 50Hz
- Phase – Single Phase
- Motor Speed – 2850rpm
- Input Power (P1) – 0.84kW
- Output Power (P2) – 0.58kW
- Full Load Current – 3.7A
- Locked Rotor Current – 12.0A
- Motor Type – TEFC
- Motor Enclosure – IP55
- Insulation Class – Class F
- Motor Starting – PSC
- Motor Protection – Automatic Reset Thermal Overload
- Motor Bearings – Double Contact C3-HTG Sealed Bearings
- Inlet – 25mm (1") Female BSP
- Outlet – 25mm (1") Female BSP
- Pump Casing – 304 Stainless Steel
- Impellers – Glass Filled Polycarbonate
- Pump Shaft – 304 Stainless Steel
- Suction Cover – Glass Filled Noryl
- Diffusers – Glass Filled Noryl
- Mechanical Seal – Carbon / Ceramic
- Seal Spring – 304 Stainless Steel
- O-Rings – Nitrile Rubber
- Motor Shell – Marine Grade Aluminium
- Motor Finish – Baked Polyester
- Water Temperature Range – 1°C to 50°C
- Maximum Ambient Temperature – 50°C
- Power Lead – 2 Metres
- Power Plug – Australian 10A Three-Pin
- Length – 325mm
- Height – 220mm
- Net Weight – 7.2kg
- Applications – Irrigation, Aquaculture, Water Transfer, Washing Systems & Hydroponics
Downloads: